국제 학술지

Seung-Hwan Kang, Dong-Ho Rhee, Young Seok Kang, 2024, "Improvement on Compressible Multiple-Reference-Frame Solver in OpenFOAM for Gas Turbine Flow Analysis," Appl. Sci, Vol 14, 8269. https://doi.org/10.3390/app14188269

DongEun Lee, Heeyoon Chung, Young Seok Kang, Dong-Ho Rhee, 2024, "A Study of an Integrated Analysis Model with Secondary Flow for Assessing the Performance of a Micro Turbojet Engine," Appl. Sci, Vol 14, 7606. https://doi.org/10.3390/app14177606

Yunsup Hwang, Seokmin Kim, DongEun Lee, Dong-Ho Rhee, Heeyoon Chung, Young Seok Kang, 2024, "Research of Turbofan Engine Derived from Micro Turbojet Engine,"  International Journal of Gas Turbine, Propulsion and Power Systems, Vol. 15, No. 5, TP 7 (JGPP Vol. 15, No. 5, TP 7)

Minho Bang, Seungyeong Choi, Seok Min Choi, Dong-Ho Rhee, Hee Koo Moon, Hyung Hee Cho, 2023, "Augmented cooling performance in gas turbine blade tip with slot cooling," International Journal of Heat and Mass Transfer, Vol. 201, 123664

Seungyeong Choi, Paul Choi, Ho-Seong Sohn, Dong-Ho Rhee, Hyung Hee Cho, 2023, "Local heat and mass transfer in a rotor-stator system with hub inflow: Thermal boundary layer and superposition effect," International Communications in Heat and Mass Transfer, Vol. 144, 106799

Seokmin Kim, DongEun Lee, Young Seok Kang, Dong-Ho Rhee, 2023, "Experimental Study on the Improvement of the Film Cooling Effectiveness of Various Modified Configurations Based on a Fan-Shaped Film Cooling Hole on a Flat Plate," Energies, 16(23), 7752.

Seokmin Kim, DongEun Lee, Young Seok Kang, Dong-Ho Rhee, 2023, "Experimental Study on the Improvement of Film Cooling Effectiveness of Various Modified Configurations Based on a Fan-Shaped Film Cooling Hole on an Endwall," Energies, 16(23), 7733.

Young Seok Kang,  Sangook Jun,  Dong-Ho Rhee, 2022, "Large Eddy Simulations on Fan Shaped Film Cooling Hole With Upstream Boundary Layer Turbulence Effect Generated by Trip Strip," ASME J. Thermal Sci. Eng. Appl. Mar 2022, 14(3): 031006 (15 pages)

Sangook Jun, Dong-Ho Rhee, Young Seok Kang, Heeyoon Chung, Jae-Hwan Kim, 2022, "Application of the Source Term Method and Fan-Shaped Hole for Cooling Performance Improvement in a High-Pressure Turbine," Energies, 15(19), 6943

Semi Kim, Jaeho Choi, Ewan Gunn, Tobias Brandvik, Young Seok Kang, 2022, "Stall Inception in a Compressor with Subsonic, Transonic, and Supersonic Inlet Conditions," Journal of Propulsion and Power, Vol. 38(3), pp. 359-369

Young-Seok Kang, Dong-Ho Rhee, Yu Jin Song, Jae Su Kwak, 2021, "Large Eddy Simulations on Film Cooling Flow Behaviors with Upstream Turbulent Boundary Layer Generated by Circular Cylinder," Energies 14(21):7227 (DOI:10.3390/en14217227)

Minho Bang, Sangjae Kim, Hee Seung Park, Taehyun Kim, Dong-Ho Rhee, Hyung Hee Cho, 2021, "Impingement/effusion cooling with a hollow cylinder structure for additive manufacturing: Effect of channel gap height," International Journal of Heat and Mass Transfer, Vol. 175(5):121420 (DOI:10.1016/j.ijheatmasstransfer.2021.121420)

Yoonki Kim, Sanga Lee, Kwanjung Yee, Young-Seok Kang, 2019, "Aerodynamic Efficiency Optimization of the 1st Stage of Transonic High Pressure Turbine through Lean and Sweep Angles," International Journal of Turbo & Jet-Engines, Vol. 36(3), pp. 245-256

Yoonki Kim, Sang-A Lee, Kwanjung Yee, Dong-Ho Rhee, 2018, "High-to-Low Initial Sample Ratio of Hierarchical Kriging for Film Hole Array Optimization," AIAA Journal of Propulsion and Power, Vol. 34(1), pp. 1 - 8 (DOI:10.2514/1.B36556)

Young Seok Kang, Byeung Jun Lim, Bong Jun Cha, 2017, "Multi-Stage Turbocharger System Analysis Method for High Altitude UAV Engine," Journal of Mechanical Science and Technology, Vol. 31, pp. 2803-2811

Sang-A Lee, Kwanjung Yee, Dong-Ho Rhee, 2017, "Optimum Arrangement of Film Cooling Holes Considering the Manufacturing Tolerance," AIAA  Journal of Propulsion and Power, Vol. 33(4), pp. 1 - 11 (DOI:10.2514/1.B36210)

Sunwoo Hwang, Changmin Son, Doyoung Seo, Dong-Ho Rhee, Bongjun Cha, 2016, "Comparative study on steady and unsteady conjugate heat transfer analysis of a high pressure turbine blade," Applied Thermal Engineering, Volume 99, pp. 765-775

Jeong-Gyu Bak, Jinsoo Cho, Seawook Lee, Young Seok Kang, 2016, "Effects of Inlet Turbulence Conditions and Near-Wall Treatment Methods on Heat Transfer Prediction over Gas Turbine Vanes," International Journal of Aeronautical and Space Sciences, Vol. 17(1), pp. 8-19

Heeyoon Chung, Jun Su Park, Sehjin Park, Seok Min Choi, Dong-Ho Rhee, Hyung Hee Cho, 2015, "Augmented heat transfer with intersecting rib in rectangular channels having different aspect ratios," International Journal of Heat and Mass Transfer, Vol.v88, pp. 357-367

Jun Su Park, Dong Hyun Lee, Dong-Ho Rhee, Shin Hyung Kang, Hyung Hee Cho, 2014, "Heat transfer and film cooling effectiveness on the squealer tip of a turbine blade," Energy, Vol. 72, pp. 331-343

Heeyoon Chung, Jun Su Park, Ho-Seong Sohn, Dong-Ho Rhee, Hyung Hee Cho, 2014, "Trailing edge cooling of a gas turbine blade with perforated blockages with inclined holes," International Journal of Heat and Mass Transfer, Vol. 73, pp. 9-20

Saeil Lee, Dong-Ho Lee, Kyu-Hong Kim, Tae Choon Park, Byeung Jun Lim, Young-Seok Kang, 2013, "Multi-Disciplinary Design Optimization and Performance Evaluation of a Single Stage Transonic Axial Compressor," Journal of Mechanical Science and Technology, Vol. 27, pp. 3309-3318

Sanghoon Lee, Dong-Ho Rhee, Won Hyeng Pyen, Hyung Hee Cho, 2011, "Visualization of liquid water movement on the micro sub-channels of flow paths in a proton exchange membrane fuel cell cathode separator," Journal of Mechanical Science and Technology, Vol. 25, pp. 957-961

Sangwon Hong, Saeil Lee, Sangook Jun, Dong-Ho Lee, Hyungmin Kang, Young-Seok Kang, Soo-Seok Yang, 2011, "Reliability-Based Design Optimization of Axial Compressor using Uncertainty Model for Stall Margin," Journal of Mechanical Science and Technology, Vol. 25, pp. 731-740

Akhilesh P. Rallabandi, Dong-Ho Rhee, Zhihong Gao, Je-Chin Han, 2010, "Heat transfer enhancement in rectangular channels with axial ribs or porous foam under through flow and impinging jet conditions," International Journal of Heat and Mass Transfer, Vol 53, Issues 21–22, pp. 4663-4671

Sung Kook Hong, Dong Hyun Lee, Hyung Hee Cho, Dong-Ho Rhee, 2010, "Local heat/mass transfer measurements on effusion plates in impingement/effusion cooling with rotation," International Journal of Heat and Mass Transfer, Vol. 53, Issues 7–8, pp. 1373-1379

Young-Seok Kang, Shin-Hyoung Kang, 2010, "Prediction of the Nonuniform Tip Clearance Effect on the Axial Compressor Flow Field," Journal of Fluids Engineering, Vol. 132(5)

Dong Hyun Lee, Dong-Ho Rhee, Kyung Min Kim, Hyung Hee Cho, Hee Koo Moon, 2009, "Detailed measurement of heat/mass transfer with continuous and multiple V-shaped ribs in rectangular channel," Energy, Vol. 34, No. 11, pp. 1770-1778

Lesley M. Wright, Sarah A. Blake, Dong-Ho Rhee, Je-Chin Han, 2009, "Effect of Upstream Wake With Vortex on Turbine Blade Platform Film Cooling With Simulated Stator-Rotor Purge Flow," ASME J. of Turbomachinery, Vol. 131(2): 021017 (10 pages)

Dong-Ho Rhee, Hyung Hee Cho, 2008, "Effect of vane/blade relative position on heat transfer characteristics in a stationary turbine blade: Part 1. Tip and shroud," International Journal of Thermal Sciences, Vol 47, Issue 11, pp. 1528-1543

Dong-Ho Rhee, Hyung Hee Cho, 2008, "Effect of vane/blade relative position on heat transfer characteristics in a stationary turbine blade: Part 2. Blade Surface," International Journal of Thermal Sciences, Vol 47, Issue 11, pp. 1544-1554

Hyung Hee Cho, Dong Ho Rhee, R. J. Goldstein, 2008, "Effects of Hole Arrangements on Local Heat/Mass Transfer for Impingement/Effusion Cooling With Small Hole Spacing," ASME J. of Turbomachinery, Vol. 130, No. 4, 041003 (11 pages)

Kyung Min Kim, Yun Young Kim, Dong Hyun Lee, Dong Ho Rhee, Hyung Hee Cho, 2007, "Influence of Duct Aspect Ratio on Heat/Mass Transfer in Coolant Passages with Rotation," International Journal Heat and Fluid Flow, Vol. 28, pp. 357-373

Sung Kook Hong, Dong-Ho Rhee, Hyung Hee Cho, 2007, "Effects of Fin Shapes and Arrangements on Heat Transfer for Impingement/Effusion Cooling with Crossflow," ASME Journal Heat Transfer, Vol. 129, pp. 1697-1707

Dong-Ho Rhee, Hyung Hee Cho, 2006, "Local Heat/Mass Transfer Characteristics on a Rotating Blade With Flat Tip in a Low-Speed Annular Cascade—Part I: Near-Tip Surface," ASME J. of Turbomachinery, Vol. 128, No. 1, pp. 96-109

Dong-Ho Rhee, Hyung Hee Cho, 2006, "Local Heat/Mass Transfer Characteristics on a Rotating Blade With Flat Tip in a Low-Speed Annular Cascade—Part II: Tip and Shroud," ASME J. of Turbomachinery, Vol. 128, No. 1, pp. 110-119

Sung Kook Hong, Dong-Ho Rhee, Hyung Hee Cho, 2006, "Heat/Mass Transfer with Circular Pin Fins in Impingement/Effusion Cooling System with Crossflow," AIAA Journal Thermophysics and Heat Transfer, Vol. 20, pp. 728-737

Young Seok Kang, Jae-Chun Yoo, Shin-Hyoung Kang, 2006, "Numerical Predictions of Roughness Effects on the Performance Degradation of an Axial-Turbine Stage," Journal of Mechanical Science and Technology, Vol. 20, pp. 1077-1088

Hark-Jin Eum, Young Seok Kang, Shin-Hyoung Kang, 2004, "Tip Clearance Effect on Through-flow and Performance of a Centrifugal Compressor," KSME International Journal, Vol. 18, pp. 979-989

Dong-Ho Rhee, Yong Woo Nam, Hyung Hee Cho, 2003, "Local heat/mass transfer with various rib arrangement/effusion cooling system with crossflow," ASME J. of Turbomachinery, Vol. 126, pp. 615-626

Hyung Hee Cho, Sei Young Lee, Dong-Ho Rhee, 2003, "Effects of cross ribs on heat/mass transfer in a two-pass rotating duct," Heat and Mass Transfer, Vol. 40, pp. 743-755

Hyung Hee Cho, Sei Young Lee, Jung Ho Won, Dong-Ho Rhee, 2003, "Heat/Mass Transfer in a Two-Pass Rotating Rectangular Duct with and without 70°-angled Ribs," Heat and Mass Transfer, Vol. 40, pp. 467-475

Hyung Hee Cho, Yun Young Kim, Dong-Ho Rhee, Sae Young Lee, Seong Je Wu, Chung Choi, 2002, "The Effects of Gap Position in Discrete Ribs on Local Heat/Mass Transfer in a Square Duct," Journal of Enhanced Heat Transfer, Vol. 10, pp. 287-300

Hyung Hee Cho, Chung Ho Won, Goo Young Ryu, Dong-Ho Rhee, 2002, "Local Heat Transfer Characteristics in a Single Rotating Disk and Co-Rotating Disks," Microsystem Technologies, Vol. 9, pp. 399-408

Dong-Ho Rhee, Jong Hyun Choi, Hyung Hee Cho, 2002, "Local Heat(Mass) Transfer Measurement on the Effusion Plate in Impingement/Effusion Cooling Systems," Journal of Thermophysics and Heat Transfer, Vol. 17, pp. 95-102

Dong-Ho Rhee, Jong Hyun Choi, Hyung Hee Cho, 2002, "Flow and Heat(Mass) Transfer Characteristics in an Impingement/Effusion Cooling System with Crossflow," ASME Journal of Turbomachinery, Vol. 125, pp. 74-82

Dong-Ho Rhee, Pil Hyun Yoon, Hyung Hee Cho, 2002, "Local Heat/Mass Transfer and Flow Characteristics of Array Impinging Jets with Effusion Holes Ejecting Spent Air," International Journal of Heat and Mass Transfer, Vol. 46, pp. 1049-1061

Hyung Hee Cho, Sung Gu Kang, Dong-Ho Rhee, 2001, "Heat/Mass Transfer Measurement Within a Film Cooling Hole of Square and Rectangular Cross Section," ASME Journal of Turbomachinery, Vol. 123, pp. 806-814

Hyung Hee Cho, Dong-Ho Rhee, Jong Hyun Choi, 2001, "Heat/Mass Transfer Characteristics on Turbine Shroud with Blade Tip Clearance," Annals of The New York Academy of Sciences, Vol. 934, pp. 281-288

Hyung Hee Cho, Dong-Ho Rhee, "Local Heat/Mass Transfer Measurement on the effusion plate in Impingement/Effusion Cooling System," ASME Journal of Turbomachinery, Vol. 123, pp. 601-608

Hyung Hee Cho, Dong-Ho Rhee, Byung Gi Kim, 2001, "Enhancement of Film Cooling Performance Using A Shaped Film Cooling Hole With Compound Angle Injection," JSME International Journal, Series B, Vol. 44, pp. 99-110