국제 학회 발표

DongEun Lee, Kyungjae Lee, Heeyoon Chung, Young Seok Kang, Dong-Ho Rhee, 2023, "Performance and Thermo-Fluid Analysis of Micro Turbojet Integrated Model at Various Operating Conditions," The 11th Asian Joint Conference on Propulsion and Power (AJCPP), Paper No. ACJPP2023-150.

Seokmin Kim, Dong-Ho Rhee, Young Seok Kang, 2023, "Large Eddy Simulations on Fan-Shaped Film Cooling Hole with Various Upstream Conditions," ASME Turbo EXPO 2023, Paper No. GT2023-109863

Yunsup Hwang, Seokmin Kim, DongEun Lee, Dong-Ho Rhee, Heeyoon Chung, Young Seok Kang, "Research of Turbofan Engine Derived from Micro Turbojet Engine," International Gas Turbine Congress 2023 (IGTC 2023).

Seokmin Kim, Young Seok Kang, Dong-Ho Rhee, "A Study on the Film Cooling Characteristics of Fan-shaped Film Cooling Hole with Compound Expansion on a Flat Plate," International Gas Turbine Congress 2023 (IGTC 2023).

DongEun Lee, Seokmin Kim, Heeyoon Chung, Young Seok Kang, Dong-Ho Rhee, 2022, "Implementation of 3D Integrated Analysis Model of Micro Turbojet Engine," Asian Congress on Gas Turbines 2022(ACGT2022), Paper No. ACGT2022-0107.

Seokmin Kim, Dong-Eun Lee, Young Seok Kang, Dong-Ho Rhee, 2022, "Experimental Study of Film Cooling Effectiveness Enhancement using Fan-Shaped Film Cooling Holes with Compound Expansion Configuration," Asian Congress on Gas Turbines 2022 (ACGT2022), Paper No. ACGT2022-0108.

Young Seok Kang, Sangook Jun, Dong-Ho Rhee, 2021, "Large Eddy Simulations on Fan Shaped Film Cooling Hole With Various Inlet Turbulence Generation Methods," ASME Turbo EXPO 2021, Paper No. GT2020-15830

Young Seok Kang, Dong-Ho Rhee, Sanga Lee, Bong Jun Cha, 2019, "Conjugate Heat Transfer Analysis to Assess Overall Cooling Effectiveness of High Pressure Turbine Nozzle With Optimized Film Cooling Hole Arrangements," ASME Turbo EXPO 2019, Paper No: GT2019-91194

Hyun Jae Seo, Sang Hyeon Park, Jae Su Kwak, Young Seok Kang, 2019, "Experimental and Numerical Study on the Effect of Fan-Shaped Hole Configuration on Film Cooling Effectiveness," ASME Turbo EXPO 2019, Paper No. GT2019-90817,

Dong-Ho Rhee, Young Seok Kang, Bong Jun Cha, Sanga Lee, 2017, "Overall Cooling Effectiveness Measurements on Pressure Side Surface of the Nozzle Guide Vane with Optimized film cooling Hole Arrangements," ASME Turbo EXPO 2017, Paper No. GT2017-63421

Sanga Lee, Dong-Ho Rhee, Bong Jun Cha, Kwanjung Yee, 2016, “Film Cooling Performance Improvement with Optimized Hole Arrangements of Pressure Side Surface of Nozzle Guide Vane – Part I: Optimization & Numerical Investigation,” ASME Turbo EXPO 2016, Paper No. GT2016-57975

Dong-Ho Rhee, Young Seok Kang, Bong Jun Cha, Jeongseek Kang, Kwanjung Yee, Sanga Lee, 2016,  “Film Cooling Performance Improvement with Optimized Hole Arrangements of Pressure Side Surface of Nozzle Guide Vane – Part II: Experimental Validation,” ASME Turbo EXPO 2016, Paper No. GT2016-57978

Inkyom Kim, Jinuk Kim, Jinsoo Cho, Young-Seok Kang, 2016, "Non-Axisymmetric Endwall Profile Optimization of a High-Pressure Transonic Turbine Using Approximation Model," ASME Turbo EXPO 2016, Paper No: GT2016-57970,

Sanga Lee, Saeil Lee, Kyu-Hong Kim, Dong-Ho Lee, Young-Seok Kang, Dong-Ho Rhee, 2014, "Optimization Framework Using Surrogate Model for Aerodynamically Improved 3D Turbine Blade Design," ASME Turbo EXPO 2014, Paper No: GT2014-26571

Heeyoon Chung, Jun Su Park, Sehjin Park, Seok Min Choi, Hyung Hee Cho, Dong-Ho Rhee, 2014, "Augmented Heat Transfer for Angled Rib With Intersecting Rib in Rectangular Channels of Different Aspect Ratios," ASME Turbo EXPO 2014, Paper No: GT2014-26924

Heeyoon Chung, Jun Su Park, Ho-Seong Sohn, Dong-Ho Rhee, Hyung Hee Cho, 2013, "Trailing Edge Cooling of a Gas Turbine Blade With Perforated Blockages With Inclined Holes," ASME Turbo EXPO 2013, Paper No: GT2013-95445

Jun Su Park, Dong Hyun Lee, Hyung Hee Cho, Dong-Ho Rhee, Shin-Hyung Kang, 2010, "Heat Transfer and Effectiveness on the Film Cooled Tip and Inner Rim Surfaces of a Turbine Blade," ASME Turbo EXPO 2010, Paper No: GT2010-23203

Dong Hyun Lee, Dong-Ho Rhee, Kyung Min Kim, Hyung Hee Cho, 2010, "Effects of Vane/Blade Relative Positions and Showerhead Film Cooling on a Stationary Blade: Heat Transfer," ASME Turbo EXPO 2010, Paper No: GT2010-23321

Yao-Hsien Liu, Michael Huh, Dong-Ho Rhee, Je-Chin Han, Hee-Koo Moon, 2008, "Heat Transfer in Leading Edge, Triangular Shaped Cooling Channels With Angled Ribs Under High Rotation Numbers," ASME Turbo EXPO 2008, Paper No: GT2008-50344

Lesley M. Wright, Sarah A. Blake, Dong-Ho Rhee, Je-Chin Han, 2007, "Effect of Upstream Wake With Vortex on Turbine Blade Platform Film Cooling With Simulated Stator-Rotor Purge Flow," ASME Turbo Expo 2007, Paper No: GT2007-27092

Dong Hyun Lee, Dong-Ho Rhee, Hyung Hee Cho, Hee-Koo Moon, 2006, "Heat Transfer Measurements in a Rotating Equilateral Triangular Channel With Various Rib Arrangements," ASME Turbo EXPO 2006, Paper No: GT2006-90973

Dong-Ho Rhee, Hyung-Hee Cho, 2005, "Local Heat/Mass Transfer Characteristics on a Rotating Blade With Flat Tip in a Low Speed Annular Cascade: Part 1 — Near-Tip Surface," ASME Turbo EXPO 2005, Paper No: GT2005-68723

Dong-Ho Rhee, Hyung-Hee Cho, 2005, "Local Heat/Mass Transfer Characteristics on a Rotating Blade With Flat Tip in a Low Speed Annular Cascade: Part 2 — Tip and Shroud," ASME Turbo EXPO 2005, Paper No: GT2005-68724

Sung Kook Hong, Dong-Ho Rhee, Hyung Hee Cho, 2005, "Effects of Fin Shapes and Arrangements on Heat Transfer for Impingement/Effusion Cooling With Crossflow," ASME Turbo EXPO 2005, Paper No: GT2005-68684

Kyung Min Kim, Yun Young Kim, Dong-Ho Rhee, Hyung Hee Cho, 2004, "An Investigation of Duct Aspect Ratio Effects on Heat/Mass Transfer in a Rotating Duct With 90° Ribs," ASME Turbo Expo 2004, Paper No: GT2004-53533

Dong-Ho Rhee, Yong Woo Nam, Hyung Hee Cho, 2004, "Local Heat/Mass Transfer With Various Rib Arrangements in Impingement/Effusion Cooling System With Crossflow," ASME Turbo Expo 2004, Paper No: GT2004-53686

Hyung-Hee Cho, Dong-Ho Rhee, R. J. Goldstein, 2004, "Effect of Hole Arrangements on Local Heat/Mass Transfer for Impingement/Effusion Cooling With Small Hole Spacing," ASME Turbo Expo 2004, Paper No: GT2004-53685

Dong-Ho Rhee, Dong Hyun Lee, Hyung Hee Cho, Hee Koo Moon, 2003, "Effects of Duct Aspect Ratios on Heat/Mass Transfer With Discrete V-Shaped Ribs," ASME Turbo Expo 2003, Paper No: GT2003-38622

Dong-Ho Rhee, Youn Seok Lee, Young Bong Kim, Hyung Hee Cho, 2003, "Film Cooling and Thermal Field Measurements for Staggered Rows of Rectangular-Shaped Film Cooling Holes," ASME Turbo Expo 2003, Paper No: GT2003-38608

Hyung Hee Cho, Yun Young Kim, Kyung Min Kim, Dong Ho Rhee, 2003, "Effects of Rib Arrangements and Rotation Speed on Heat Transfer in a Two-Pass Duct," ASME Turbo Expo 2003, Paper No: GT2003-38609

Dong-Ho Rhee, Youn Seok Lee, Hyung Hee Cho, 2002, "Film Cooling Effectiveness and Heat Transfer of Rectangular-Shaped Film Cooling Holes," ASME Turbo Expo 2002, Paper No: GT2002-30168

Dong-Ho Rhee, Jong Hyun Choi, Hyung Hee Cho, 2002, "Flow and Heat (Mass) Transfer Characteristics in an Impingement/Effusion Cooling System With Crossflow," ASME Turbo Expo 2002, Paper No: GT2002-30474

Dong Ho Rhee, Jong Hyun Choi, Hyung Hee Cho, 2001, "Effect of Blade Tip Clearance on Turbine Shroud Heat/Mass Transfer," ASME Turbo EXPO 2001, Paper No: 2001-GT-0158

Hyung Hee Cho, Seung Goo Kang, Dong-Ho Rhee, 2001, "Heat/Mass Transfer Measurement Within a Film Cooling Hole of Square and Rectangular Cross Sections," ASME Turbo EXPO 2001, Paper No: 2001-GT-0128

Hyung Hee Cho, Dong Ho Rhee, 2000, "Local Heat/Mass Transfer Measurement on the Effusion Plate in Impingment/Effusion Cooling System," ASME Turbo EXPO 2000, Paper No: 2000-GT-0252